Tel: +1.281.442.0050

14041 Chrisman Road,

Houston TX 77039

Specialty Primer/Coating For Oil Spots, Grease Contaminations, Polished Aggregates, Fresh Asphalts and Problematic Adhesions Areas.


As a Primer ​ 
 - Will prevent oil, grease and contaminants from bleeding up through the sealcoating, and will improve surface appearance. 
- Useful for areas that have been contaminated by tree sap, which causes sealcoatings to flake off in an unusual and confounding way.

- Is easy to use. Supplied as a concentrate with simple on-the-job mixing with water.


S.O.S. is concentrated; allows easier storage and shipping
- Dries in 20-30 minutes.
- Will not debond from the oil spot and will not allow the sealer to peel away from primed areas.

Specialty polymer, latex based additive, that speeds up drying time without changing the mix design viscosity.


50% Faster Drying Times 
Speeds up drying time allowing traffic sooner and reducing labor costs.
No Viscosity Change 
Does not thicken or change the viscosity of the sealer mix design.
Improves Performance 
Enhances tensile strength, flexibility and adhesion properties of the cured sealer.

Additives and Primers


SEALCOATING ADDITIVES

STAR manufactures high quality sealcoatings additives that enhance and stregthen the natural qualities of our

high performance sealers. Choose the additive you use according to the needs and specifications of each project. Review our additive product bulletins and specifications for the right material for your upcoming projects.

Specialty Primer/Coating For Oil Spots, Grease Contaminations, Polished Aggregates, Fresh Asphalts and Problematic Adhesions Areas.


As a Coating​ 
Will prevent oil, grease and contaminants from penetrating into the asphalt pavement. 
As a Primer ​ 
Will prevent oil, grease and contaminants from bleeding up through the sealcoating, and will improve surface appearance. 

On Concrete​ 
Will aggressively adhere to concrete surfaces and act like a sealcoating by itself or as a primer so that sealcoating appears uniform across all surfaces on a properly with both concrete and asphalt pavements. Will eliminate the need for excessive surface preparation that could damage the asphalt substrate. Will not only protect the asphalt surface it will beautify any pavement that has been discolored due to petrochemical contamination staining the surface.

High potency acrylic based additive that packs the benefits of several types of additives in one impressive product.​


Toughens the Sealer Film 
Improves tensile strength reducing power steering marks and scuffing.
Faster Drying Times 
Speeds up drying time allowing traffic sooner and reducing labor costs.
Dries Black 
The inclusion of carbon black enhances the cured color of sealcoatings.
Builds Viscosity 
Allows larger quantities of sand suspension.

SEALCOATING PRIMERS

True rubberizing A/B Latex based additive that significantly improves performance of sealcoatings.


Toughens Sealer Film 
Enhances tensile strength, flexibility and adhesion properties of the cured sealer.
Boosts Viscosity 
Enables sealer to suspend larger quantities of sand effectively.
Meets FAA Specification
​Can allow a Refined Tar mix design the  ability to meet FAA Specifications.

Tel: +1.281.442.0050

14041 Chrisman Road,

Houston TX 77039

An additive that delivers three benefits in one potent package; fast drying, viscosity boost and enhanced performance.


Fastest Drying Times 
Cuts drying time up to 75% supporting traffic sooner and reducing labor costs.
Toughens Sealer Film 
Enhances tensile strength, flexibility and adhesion properties of the cured sealer.
Boosts Viscosity 
Enables sealer to suspend larger quantities of sand effectively.

A specialty coating that is used for asphalt surfaces riddled with rust spots and streaks. It hides and significantly retards the continued rusting of “pyrites” (iron bearing aggregate) in the pavement.

Will prevent rust spotting and improve surface appearance. 
- Is easy to use. Use straight from the container with conventional tools. 
- Dries in 30 minutes, Cures in as few as 2 to 4 hours. 
- Use as a black coating by itself or as part of a system and apply traditional sealcoating after treating the rust spots.

- Use as an affective primer over striping to black out existing traffic controls and lot lines. 

- Dries to rich black satin finish.

STAR manufactures specialty coatings and primers to address tough pavement problems such as adhesion, stains, contaminations, rust, sealcoating over fresh asphalt, oil spots and other surface preparation challenges. Review our specialty coatings and primers product information to choose the right material for your toughest projects.