Tel: +1.281.442.0050

14041 Chrisman Road,

Houston TX 77039

• Cold-Pour and ready to use. STAR® STA-FLEX™ does not require any pre-heating and is ready to use without extensive mixing.

• Flexible and durable, it is rubberized with polymers and reinforced with specialty chemicals and minerals for best performance. 

• Safe to use and cleans up with water, is non flammable and is not considered a hazardous material.

• The most tested material by government organizations world-wide

• Ongoing support for the life of the material
• Reduces total repair costs

• Region-specific formulations that ensure UPM mix works 

• Unmatched quality control in every mix

• Warranty—guaranteed high performance​

Tack emulsions for cold mix and priming pavements.

Rubberized Cold Pour Crack Filler Based On Asphalt Emulsion

Tel: +1.281.442.0050

14041 Chrisman Road,

Houston TX 77039

Heavy bodied patching and repair product specifically designed for repairing excessively cracked asphalt surfaces.

• High performance-polymer and rubber modified hot pour crack filler

• Heat Stabilized Formula for direct fired kettles
• Resistant to pick up and tracking under hot pavement conditions, superior flexibility in cold temperatures

• Rapid Melting and Fast Leveling 

• Low Penetration characteristics

COLD APPLIED CRACK FILLERS

CRAFCO® ROADSAVER 211 (Meets ASTM D6690 Type1 formerly ASTM D1190)

UPM® Cold Mix is the Benchmark Other Cold Mix Providers Try to Emulate

• Anionic slow setting emulsion, used for many applications, including tack and prime. It should normally be diluted with water for prime applications.

• Low cost treatment significantly increases bond strength between pavement layers

• Stronger bond between layers increases pavement structural strength and fatigue life

• Asphalt emulsion tack prevents slippage and reduces pushing and shoving

ELASTOBOND HS™ HOT POUR (PREMIUM, DIRECT FIRE, HEAT STABILIZED)

• Cold-applied and ready to use. Being asphalt emulsion based, STAR® SURE-FLEX™does not require any pre-heating and is ready to use straight from the container without extensive mixing.

Tough, flexible and durable, it is rubberized with polymers and reinforced with specialty chemicals and minerals.

• Safe to use and cleans up with water, is non flammable and is not considered a hazardous material.

COLD ASPHALT PATCH AND TACK COAT

CRAFCO® POLYFLEX TYPE 3

• Hot applied asphalt based product to seal and fill cracks and joints in asphalt and portland cement

• Supplied in solid form which is intended to be used in an oil jacketed melter 
• When properly applied forms an adhesive and flexible compound that that resists cracking in the winter and is resistant to flow in summer temperatures 

• Recommended for use on highways, streets and airfield pavements

• At application temperature Roadsaver 211 is free flowing, self leveling product

Premium heavy bodied patching and repair product specifically designed for repairing excessively cracked asphalt surfaces.

• Cold-applied and ready to use. STAR® STA-FLEX™ Trowel Grade does not require any pre-heating and is ready to use without extensive mixing.

• Flexible and durable, it is rubberized with polymers and reinforced with specialty chemicals and minerals for better performance.

• Safe to use and cleans up with water, is non flammable and is not considered a hazardous material.


Hot Melt CracK Sealers

CRACK FILLERS AND Asphalt Patching Materials

• Hot applied asphalt based product to seal and fill cracks and joints in asphalt and portland cement designed for use in warm to hot climates with improved summer temperature pick-up resistance

• Supplied in solid form which is intended to be used in an oil jacketed melter

• Polyflex 3 is a lower to medium viscosity product which flows and penetrates cracks more easily 
• Recommended for use on highways, streets, airfield and parking lot surfaces
• At application temperature Polyflex Type 3 is free flowing, self leveling product with quicker set up times